ДАТЧИК ДАВЛЕНИЯ В ВЫПУСКНОМ КОЛЛЕКТОРЕ УСТАНОВКА


  1. INSTALL EXHAUST MANIFOLD PRESSURE SENSOR


    1. Apply a light coat of engine oil to the O-ring of the exhaust manifold pressure sensor.

    2. Using a 27 mm deep socket wrench, install the exhaust manifold pressure sensor.

      Note


      • Do not allow foreign matter to contact the oil seal face of the exhaust manifold pressure sensor.

      • Be careful not to damage the O-ring when installing the exhaust manifold pressure sensor.

    3. Connect the exhaust manifold pressure sensor connector.

  2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY


    1. A01ISD7E01
      Text in Illustration
      *1 Retainer

      Connect the air cleaner hose assembly to the turbocharger sub-assembly and lock the retainer as shown in the illustration.

    2. Attach the 2 clamps to install the air cleaner cap sub-assembly.

    3. Connect the ventilation hose to the cylinder head cover sub-assembly.

    4. Attach the clamp and connect the No. 2 fuel hose to the air cleaner hose assembly.

    5. Attach the clamp and connect the No. 1 fuel hose to the air cleaner hose assembly.

    6. Attach the clamp and connect the vacuum hose to the air cleaner hose assembly.

    7. Attach the clamp and connect the mass air flow meter sub-assembly connector.

  3. INSTALL NO. 1 ENGINE COVER


    1. A01IQK8E02
      Обозначения на рисунке
      *a Точки установки

      Введите в зацепление 4 фиксатора, чтобы закрепить крышку двигателя № 1.

      Tech Tips

      Устанавливая фиксаторы, нажимайте на выступы в верхней части крышки двигателя № 1 в точках установки фиксаторов.