ОХЛАДИТЕЛЬ РОГ УСТАНОВКА

INSTALL NO. 2 EGR VALVE ASSEMBLY

1. Install a new gasket and the No. 2 EGR valve.

   Tip:

   Make sure that the claw of the gasket faces the EGR cooler.

INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY

1. Install a new gasket to the No. 2 EGR valve.

2. Temporarily install the No. 1 EGR pipe with the 2 bolts and 2 nuts.

   Tip:

   Tighten the bolts and nuts until there is no gap between the No. 1 EGR pipe, No. 2 EGR valve and EGR cooler.

INSTALL EGR COOLER WITH PIPE ASSEMBLY

1. Install a new O-ring to the EGR cooler with pipe.

2. Install a new gasket to the EGR cooler and a new gasket to the No. 1 EGR pipe.

3. 

   Temporarily install the EGR cooler with pipe with the 6 bolts and 2 nuts labeled A, B and C.

   Table 1. Text in Illustration

   *1

   Nut

   -

   -

   Standard Bolt
   Item Length Bolt A 16 mm (0.630 in.) Bolt B 16 mm (0.630 in.) Bolt C 25 mm (0.984 in.)

4. Tighten the 2 bolts and 2 nuts labeled A shown in the illustration.

   10 N*m

   102 kgf*cm

   7 ft.*lbf

5. Tighten the 2 bolts labeled B shown in the illustration.

   16 N*m

   163 kgf*cm

   12 ft.*lbf

6. Tighten the 2 bolts labeled C shown in the illustration.

   24 N*m

   245 kgf*cm

   18 ft.*lbf

7. Tighten the 2 bolts and 2 nuts labeled D shown in the illustration.

   21 N*m

   214 kgf*cm

   15 ft.*lbf

8. Connect the vacuum hose.

INSTALL NO. 5 WATER BY-PASS HOSE (for Manual Transaxle)

INSTALL NO. 1 TURBO WATER HOSE (for Manual Transaxle)

INSTALL NO. 2 WATER BY-PASS HOSE (for Automatic Transaxle)

INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

(Click here)