ЭЛЕКТРОННЫЙ БЛОК ПРИВОДА ФОРСУНОК УСТАНОВКА


  1. INSTALL INJECTOR DRIVER


    1. Install the injector driver bracket with the 4 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

    2. Install the injector driver with the 3 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    3. Attach the clamp and connect the 4 connectors.

  2. INSTALL RADIATOR SUPPORT OPENING COVER


    1. Attach the 4 hooks to install the radiator support opening cover.

    2. Install the 3 clips.

  3. INSTALL NO. 1 ENGINE COVER


    1. A01INMI

      Attach the 4 clips to install the No. 1 engine cover.