ЭЛЕКТРОННЫЙ БЛОК ПРИВОДА ФОРСУНОК СНЯТИЕ


  1. REMOVE NO. 1 ENGINE COVER


    1. A01INMI

      Hold the rear of the No. 1 engine cover and slowly raise it to detach the clip on the rear of the No. 1 engine cover. Continue to raise the No. 1 engine cover to detach the 3 clips on the front and side of the No. 1 engine cover and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A01IS0M

      Remove the 3 clips.

    2. Detach the 4 hooks and remove the radiator support opening cover.

  3. REMOVE INJECTOR DRIVER


    1. A01IPA6

      Detach the clamp and disconnect the 4 injector driver connectors.

    2. A01IOBA

      Remove the 3 bolts and injector driver.

    3. A01IO2Q

      Remove the 4 screws and injector driver bracket.