ДАТЧИК ОТСТОЙНИКА ТОПЛИВА ПРОВЕРКА


  1. INSPECT LEVEL WARNING SWITCH


    1. A01IRM3E02
      Text in Illustration
      *1

      Component without harness connected

      (Level Warning Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Float upper end position Below 0.5 Ω
      1 - 2 Float lower end position 1 MΩ or higher

      If the result is not as specified, replace the level warning switch.