ГОЛОВКА БЛОКА ЦИЛИНДРОВ РАЗБОРКА


  1. REMOVE INTAKE VALVE

    Tech Tips

    Arrange the intake valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


    1. Place the cylinder head sub-assembly on a wooden block.

    2. A01IMY7E01

      Using SST, compress the inner compression spring and remove the valve spring retainer lock.

      SST
      09202-70020
      09202-00021

    3. Remove the valve spring retainer, inner compression spring and intake valve.

  2. REMOVE EXHAUST VALVE

    Tech Tips

    Arrange the exhaust valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


    1. Place the cylinder head sub-assembly on a wooden block.

    2. A01INE3E01

      Using SST, compress the inner compression spring and remove the valve spring retainer lock.

      SST
      09202-70020
      09202-00021

    3. Remove the valve spring retainer, inner compression spring and exhaust valve.

  3. REMOVE VALVE STEM OIL SEAL


    1. A01INZ5

      Using needle-nose pliers, remove the valve stem oil seal.

  4. REMOVE STUD BOLT

    Tech Tips

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. Remove the 8 stud bolts.