ПРИВОДНОЙ РЕМЕНЬ УСТАНОВКА


  1. INSTALL FAN AND GENERATOR V BELT


    1. Using SST and a 22 mm wrench, rotate the tensioner pulley counterclockwise, and then install the fan and generator V belt.

      SST
      09216-42010

      CAUTION:


      • Be careful as the wrench only fits loosely on the belt tensioner tool set point. The wrench may come off the set point and cause injuries.

      • Be careful that your hands do not become jammed between parts such as the fan and generator V belt, pulleys, etc.

      Note


      • Make sure that the fan and generator V belt is set properly on each pulley.

      • Make sure SST is installed as shown in the illustration. If not, SST and/or the fan and generator V belt may not be able to be removed.

      A01ISZME02
      Text in Illustration
      *A w/o Air Conditioning System *B w/ Air Conditioning System
  2. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH


    1. A01INC5E01

      Установите правое усиление элемента передней подвески и закрепите его 4 болтами.

      Torque:
      99 Н*м  { 1010 кгс*см, 73 фунт-сила-фута }

      Note

      Затягивайте болты в порядке, указанном на рисунке.

  3. INSTALL REAR ENGINE UNDER COVER RH


    1. Закрепите защиту картера 5 фиксаторами.

  4. INSTALL NO. 1 ENGINE UNDER COVER


    1. A01IUIX

      Install the No. 1 engine under cover with the 10 clips and 6 bolts.