ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ СНЯТИЕ


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01IUIX

      Remove the 6 bolts and 10 clips.

    2. Remove the No. 1 engine under cover.

  2. REMOVE FRONT LOWER BUMPER ABSORBER


    1. A01IT8Z

      Remove the 2 clips.

    2. A01ISEU

      Remove the 4 bolts and 4 screws.

    3. Detach the 2 hooks of the front lower bumper absorber from the installation holes on the body and remove the front lower bumper absorber.

  3. REMOVE INTAKE AIR TEMPERATURE SENSOR


    1. A01ITFN

      Disconnect the sensor connector.

    2. Using a 22 mm ball joint lock nut wrench, remove the sensor and gasket.