СИСТЕМА ECD (для клапана регулирования всасывания), Diagnostic DTC:P06DF

DTC Code DTC Name
P06DF Glow Plug Control Module 1 Memory Checksum Error

DESCRIPTION

Refer to DTC P052F Click here.

DTC No. DTC Detection Condition Trouble Area
P06DF

Preheating control unit internal error for 1.2 seconds.

(3 trip detection logic)

 Glow plug controller assembly

INSPECTION PROCEDURE

Tech Tips

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.

PROCEDURE


  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P06DF)


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS on.

    3. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

    4. Read the DTCs.

      Result
      Result Proceed to
      DTC P06DF A
      DTC P06DF and other DTCs B

      Tech Tips

      If any DTCs other than P06DF are output, troubleshoot those DTCs first.


    B

    GO TO DTC CHART Click here

    A

  2. REPLACE GLOW PLUG CONTROLLER ASSEMBLY


    1. Replace the glow plug controller assembly Click here.


    NEXT

  3. CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS on.

    3. Clear the DTCs Click here.

    4. Turn the ignition switch off and wait for 60 seconds or more [A].

    5. Perform road test [B].

    6. Repeat [A] and [B] for the number of trips detected.

    7. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

    8. Confirm that the DTC is not output again.


    NEXT

    END