| DTC Code | DTC Name |
|---|---|
| P06C5 | Cylinder 1 Glow Plug Incorrect |
DESCRIPTION
Refer to P052F Click here.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P06C5 | Installed glow plug is not compatible with engine for 1.2 seconds or more (3 trip detection logic) |
|
INSPECTION PROCEDURE
Tech Tips
Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
PROCEDURE
REPLACE GLOW PLUG
Replace the glow plug Click here.
| NEXT |
|
CHECK WHETHER DTC OUTPUT RECURS (DTC P06C5)
Connect the GTS to the DLC3.
Turn the ignition switch to ON and turn the GTS on.
Clear the DTCs Click here.
Turn the ignition switch off and wait for 60 seconds or more [A].
Turn the ignition switch to ON and wait for 15 seconds or more [B].
Repeat [A] and [B] for the number of trips detected.
Enter the following menus: Engine and ECT / Trouble Codes.
Read the DTCs.
| Result | Proceed to |
|---|---|
| No DTC output | A |
| DTC P06C5 | B |
| B |
|
REPLACE GLOW PLUG CONTROLLER ASSEMBLY Click here |
| A |
|
END
REPLACE GLOW PLUG CONTROLLER ASSEMBLY
Replace the glow plug controller assembly Click here.
| NEXT |
|
CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
Connect the GTS to the DLC3.
Turn the ignition switch to ON and turn the GTS on.
Clear the DTCs Click here.
Turn the ignition switch off and wait for 60 seconds or more [A].
Turn the ignition switch to ON and wait for 15 seconds or more [B].
Repeat [A] and [B] for the number of trips detected.
Enter the following menus: Engine and ECT / Trouble Codes.
Confirm that the DTC is not output again.
| NEXT |
|
END