СИСТЕМА ECD РЕГИСТРАЦИЯ

Tech Tips


  • When the ECM must be replaced, before replacing the ECM, perform the "Learning Values Save" function using the GTS. Then after installing the new ECM, perform all of the initialization/registrations for the "Learning Values Write" function by following the instructions shown on the GTS display.

  • After replacing any of the injector assemblies, perform the "Injector Compensation" function using the GTS. If any of the injector assemblies and the ECM are replaced at the same time, perform the same initialization/registrations as when replacing the ECM.

  • After replacing the air fuel ratio sensor, perform the "O2 Sensor Learning Value Reset" function using the GTS. If the air fuel ratio sensor and the ECM are replaced at the same time, perform the same initialization/registrations as when replacing the ECM.

  • After replacing the exhaust manifold converter sub-assembly (DPF catalytic converter), perform the "DPF History Information Reset" function using the GTS. If the exhaust manifold converter sub-assembly (DPF catalytic converter) and the ECM are replaced at the same time, perform the same initialization/registrations as when replacing the ECM.

  • After replacing the engine assembly, perform the "Injector Compensation" function using the GTS. If the engine assembly and the ECM are replaced at the same time, perform the same initialization/registrations as when replacing the ECM.

  • If the "Learning Values Save" or "Learning Values Write" function has failed, input manually the injector compensation codes using the "Injector Compensation" function by following the instructions shown on the GTS display.


  1. LEARNING VALUES SAVE

    Tech Tips

    Save the compensation codes and learning values stored in the ECM to the GTS all at once in order to transfer the information from the old ECM to the new ECM.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS on.

    3. Enter the following menus: Powertrain / Engine and ECT / Utility / Learning Values Save.

    4. A01IUIM

      When the first screen is displayed, check the vehicle condition and push "Next".

      Tech Tips

      If "Learning Values Save" has failed, check the conditions and then perform it once again.

      A01IPLY
    5. A01INRP

      If the overwrite confirmation screen is displayed, press "Overwrite".

    6. A01IOEO

      When the operation is finished, confirm the date and time of the save operation, and press "Exit".

  2. LEARNING VALUES WRITE

    Tech Tips

    Write the compensation codes and learning values, which were stored in the GTS with "Learning Values Save", to the ECM all at once in order to transfer the information from the old ECM to the new ECM.

    Tech Tips

    This function is used to write the compensation codes and learning values saved in theGTS.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS on.

    3. Enter the following menus: Powertrain / Engine and ECT / Utility / Learning Values Write.

    4. A01IQBS

      When the first screen is displayed, check the vehicle condition and push "Next".

      Tech Tips

      If "The saved data does not exist." or "The saved data is not for this vehicle." is displayed, perform "Learning Values Save" once again.

      A01IO06
    5. A01IPRO

      Confirm the date and time of the save operation, and then press "Yes".

      Tech Tips

      If "Learning Values Write" has failed, check the conditions and then perform it once again.

      A01ISI1
    6. A01IT8A

      Press "Next" again to proceed.

    7. A01IR76

      When the operation is finished, confirm the date and time of the save operation, and press "Exit".

  3. INJECTOR COMPENSATION

    A01IQJLE03

    Note

    Injector compensation codes are 7-digit, alphanumeric values printed on the head of each injector assembly. If an incorrect injector compensation code is input into the ECM, the engine may rattle or engine idling may become rough. In addition, engine failure may occur and the life of the engine may be shortened.

    Text in Illustration
    *a Example
    *b Injector Compensation Code
    A01IQ52E02

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS on.

      Tech Tips

      Confirm that the ignition switch is ON and the engine is stopped.

    3. Enter the following menus: Powertrain / Engine and ECT / Utility / Injector Compensation.

    4. A01IPXA

      When the first screen is displayed, check the vehicle condition and push "Next".

    5. A01IOOF

      Select the number of the cylinder corresponding to the injector compensation code that you want to input, and press "Next".

    6. A01IPS0

      Register the compensation code.


      1. Manually input the cylinder compensation code using the keyboard. The code is a 7-digit, alphanumeric value printed on the injector head.

        Tech Tips

        The compensation code for each selected cylinder must be input into the GTS correctly.

      2. Confirm that the compensation code for the selected cylinder is correct, and then Press "Next".

        Tech Tips


        • A01IRN0

          If an input error occurs, input the compensation code once again.

        • A01IR5I

          If registering the compensation code has failed, check the conditions and perform the registration once again.

    7. A01IR1Y

      Press "Back" to return to the screen for selecting the cylinder when registering the compensation code of another cylinder. Then press "Next".

    8. A01IPD2

      Press "Next".

    9. A01IQXQ

      When the operation is finished, confirm the date and time of the save operation, and press "Exit".