INTEGRATION RELAY INSPECTION

Info Added 2017-08-02

PROCEDURE


  1. INSPECT NO. 1 INTEGRATION RELAY

    A000559E03
    Text in Illustration
    *1 No. 1 Integration Relay - -

    1. EFI MAIN Relay:


      1. A0007KNE09
        Text in Illustration
        *1 No. 1 Integration Relay

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1A-8 - 1B-1 Auxiliary battery voltage not applied between terminals 1C-7 and 1E-2 10 kΩ or higher
        1A-8 - 1B-1 Auxiliary battery voltage applied between terminals 1C-7 and 1E-2 Below 1 Ω
        1C-4 - 1B-1
        1C-9 - 1B-1
        1C-10 - 1B-1

        If the result is not as specified, replace the No. 1 integration relay

    2. EFI MAIN2 Relay:


      1. A0007KNE09
        Text in Illustration
        *1 No. 1 Integration Relay

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1A-6 - 1D-1 Auxiliary battery voltage not applied between terminals 1A-8 and 1E-2 10 kΩ or higher
        1A-6 - 1D-1 Auxiliary battery voltage applied between terminals 1A-8 and 1E-2 Below 1 Ω
        1A-7 - 1D-1
        1C-6 - 1D-1

        If the result is not as specified, replace the No. 1 integration relay.

    3. IG2 Relay:


      1. A0007KNE09
        Text in Illustration
        *1 No. 1 Integration Relay

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1A-1 - 1D-3 Auxiliary battery voltage not applied between terminals 1C-8 and 1E-2 10 kΩ or higher
        1A-1 - 1D-3 Auxiliary battery voltage applied between terminals 1C-8 and 1E-2 Below 1 Ω
        1A-3 - 1D-3
        1C-1 - 1D-3
        1C-2 - 1D-3
        1C-5 - 1D-3

        If the result is not as specified, replace the No. 1 integration relay.