HEATED OXYGEN SENSOR INSTALLATION

PROCEDURE

1. Click here

   INSTALL HEATED OXYGEN SENSOR

   
   
   1. 

      Using SST, install the heated oxygen sensor to the front exhaust pipe.

      Table 1. Text in Illustration

      *a	Fulcrum Length 30 mm
      *b	Fulcrum Length 300 mm

      09224-00010

      without SST
      44 N*m	449 kgf*cm	32 ft.*lbf
      with SST
      40 N*m	408 kgf*cm	30 ft.*lbf

      Note:
      

      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 300 mm (11.8 in.) (Click here)

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

   2. Connect the heated oxygen sensor connector.

2. Click here

   INSPECT FOR EXHAUST GAS LEAK