ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket to the engine coolant temperature sensor.

   2. Using a 19 mm ball joint lock nut wrench, install the engine coolant temperature sensor.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a ball joint lock nut wrench Click here.

      Tech Tips

      Perform "Inspection After Repair" after replacing the engine coolant temperature sensor Click here.

   3. Connect the engine coolant temperature sensor connector.

   4. Install the wire harness with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   5. Connect the ventilation hose to the cylinder head cover.

2. INSTALL INLET AIR CLEANER ASSEMBLY

   Click here

3. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

4. ADD COOLANT (for Engine)

   Click here

5. INSPECT FOR COOLANT LEAK (for Engine)

   Click here

6. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here