ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

Click here

PROCEDURE

1. Click here

   DRAIN COOLANT (for Engine)

   Click here

2. Click here

   REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here

3. Click here

   REMOVE COOL AIR INTAKE DUCT SEAL

   Click here

4. Click here

   REMOVE INLET AIR CLEANER ASSEMBLY

   Click here

5. Click here

   REMOVE ENGINE COOLANT TEMPERATURE SENSOR

   
   
   1. 

      Disconnect the ventilation hose from the cylinder head cover.

   2. 

      Disconnect the engine coolant temperature sensor connector.

   3. Remove the 2 bolts and disconnect the wire harness.

   4. 

      Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor.

      Table 1. Text in Illustration

      *1	Ball Joint Lock Nut Wrench
      *2	Gasket

   5. Remove the gasket from the engine coolant temperature sensor.