ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. DRAIN COOLANT (for Engine)

    Click here

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  3. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  4. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A0005EO

      Disconnect the ventilation hose from the cylinder head cover.

    2. A0009CA

      Disconnect the engine coolant temperature sensor connector.

    3. Remove the 2 bolts and disconnect the wire harness.

    4. A00097ZE04
      Text in Illustration
      *1 Ball Joint Lock Nut Wrench
      *2 Gasket

      Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor.

    5. Remove the gasket from the engine coolant temperature sensor.