ALIGNMENT / HANDLING DIAGNOSIS SERVICE DATA

Info Added 2017-08-02

Vehicle Height (Unloaded Vehicle)
Front A - B	Rear C - D
120 mm (4.72 in.) 121 mm (4.76 in.)*1	49 mm (1.93 in.)

*1: AVV60L-BEXGBC

Measurement points:

A: Ground clearance of front wheel center

B: Ground clearance of center of bolt head of front lower No. 2 suspension arm bushing (rear bolt of front lower No. 1 suspension arm sub-assembly)

C: Ground clearance of rear wheel center

D: Ground clearance of center of bolt head of outer rear strut rod assembly set bolt

Camber (Unloaded Vehicle)
-	Camber Inclination	Right-left Difference
Front	-0°35' +/- 0°45' (-0.58° +/- 0.75°)	0°45' (0.75°) or less
Rear	-1°10' +/- 0°45' (-1.17° +/- 0.75°)	0°45' (0.75°) or less

Caster (Unloaded Vehicle)
Caster Inclination	Right-left Difference
3°00' +/- 0°45' (3.00° +/- 0.75°)	0°45' (0.75°) or less

Steering Axis Inclination (Unloaded Vehicle)
Steering Axis Inclination Reference
12°10' (12.17°)

Toe-in (Unloaded Vehicle)
-	Specified Condition
Front	C + D: 0°00' +/- 0°10' (0.00° +/- 0.17°)
Front	B - A: 0 +/- 2.0 mm (0 +/- 0.0787 in.)
Rear	C + D: 0°13' +/- 0°10' (0.22° +/- 0.17°)
Rear	B - A: 2.5 +/- 2.0 mm (0.0984 +/- 0.0787 in.)

Wheel Turning Angle (Unloaded Vehicle)
Inside Wheel	Outside Wheel
37°23' +/- 2°00' (37.38° +/- 2°) 37°22' +/- 2°00' (37.37° +/- 2°)*1	32°56' +/- 2°00' (32.93° +/- 2°) 32°55' +/- 2°00' (32.92° +/- 2°)*1

*1: AVV60L-BEXGBC