MOTOR WATER JACKET COVER ASSEMBLY REMOVAL

PROCEDURE


  1. DRAIN COOLANT (for Inverter)

    Click here

  2. REMOVE NO. 2 MOTOR WATER JACKET COVER ASSEMBLY


    1. A00054P

      Remove the 5 bolts.

    2. Insert the blade of an oil pan seal cutter between the transaxle housing. Cut through the applied sealer and remove the No. 2 motor water jacket cover assembly from the hybrid vehicle transaxle assembly.

      Note

      Be careful not to damage the contact surfaces of the transaxle housing where the No. 2 motor water jacket cover assembly is installed.

  3. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

    Click here

  4. REMOVE FRONT ENGINE MOUNTING BRACKET

    Click here

  5. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET

    Click here

  6. REMOVE AUTOMATIC TRANSMISSION CASE COVER


    1. A0004HO

      Remove the 2 bolts, clip and automatic transmission case cover from the hybrid vehicle transaxle assembly.

  7. REMOVE NO. 1 MOTOR WATER JACKET COVER ASSEMBLY


    1. A0008ZV

      Remove the 8 bolts.

    2. Insert the blade of an oil pan seal cutter between the transaxle housing. Cut through the applied sealer and remove the No. 1 motor water jacket cover assembly from the hybrid vehicle transaxle assembly.

      Note

      Be careful not to damage the contact surfaces of the transaxle housing where the No. 1 motor water jacket cover assembly is installed.