Click here

OIL PUMP INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Note:

If the transmission oil pump drive rotor or transmission oil pump driven rotor has been replaced, inspect the fluid pressure of the transmission oil pump cover sub-assembly.

Click here

PROCEDURE


  1. Click here

    INSTALL OIL PUMP DRIVE SHAFT


    1. Install the oil pump drive shaft to the hybrid vehicle transaxle assembly.

  2. Click here

    INSTALL TRANSMISSION OIL PUMP DRIVE ROTOR


    1. Coat the transmission oil pump drive rotor with ATF.

    2. Install the transmission oil pump drive rotor to the hybrid vehicle transaxle assembly.

  3. Click here

    INSTALL TRANSMISSION OIL PUMP DRIVEN ROTOR


    1. Coat the transmission oil pump driven rotor with ATF.

    2. Install the transmission oil pump driven rotor to the hybrid vehicle transaxle assembly.

  4. Click here

    INSTALL TRANSMISSION OIL PUMP COVER SUB-ASSEMBLY


    1. Clean and degrease the bolt holes of the hybrid vehicle transaxle assembly.

    2. Coat a new O-ring with ATF and install it to the hybrid vehicle transaxle assembly.

      Note:

      Be careful not to damage the O-ring.

    3. Install the transmission oil pump cover sub-assembly to the hybrid vehicle transaxle assembly with 5 new bolts.

      8.0 N*m 82 kgf*cm 71 in.*lbf
      Note:

      Make sure that the O-ring is not cut or pinched during installation.

    4. Coat a new O-ring with ATF and install it to the fluid pump cover plug.

    5. Install the fluid pump cover plug to the transmission oil pump cover sub-assembly.

      8.0 N*m 82 kgf*cm 71 in.*lbf
  5. Click here

    INSTALL FRONT FENDER APRON SEAL LH

    Click here

  6. Click here

    INSTALL ENGINE UNDER COVER LH (w/o Front Lower Bumper Absorber)

    Click here

  7. Click here

    INSTALL ENGINE UNDER COVER LH (w/ Front Lower Bumper Absorber)

    Click here

  8. Click here

    INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  9. Click here

    INSTALL ENGINE UNDER COVER RH (w/o Front Lower Bumper Absorber)

    Click here

  10. Click here

    INSTALL ENGINE UNDER COVER RH (w/ Front Lower Bumper Absorber)

    Click here

  11. Click here

    INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  12. Click here

    INSTALL FRONT LOWER BUMPER ABSORBER (w/ Front Lower Bumper Absorber)

    Click here

  13. Click here

    INSTALL FRONT WHEEL LH

    103 N*m 1049 kgf*cm 76 ft.*lbf