Click here

TRANSMISSION CONTROL CABLE REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  2. Click here

    REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  3. Click here

    REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  4. Click here

    REMOVE AIR CLEANER FILTER ELEMENT

  5. Click here

    REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  6. Click here

    REMOVE AIRBAG SENSOR ASSEMBLY

    (Click here)

  7. Click here

    REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Click here

  8. Click here

    DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. Turn back the floor carpet.

    2. A0008YL

      Remove the bolt and nut, and disconnect the No. 1 parking brake cable assembly from the body.

  9. Click here

    REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A0003UA

      Disconnect the end of the transmission control cable assembly from the lower shift lever assembly.

    3. Disengage the 2 claws and disconnect the transmission control cable assembly from the lower shift lever assembly.

    4. A0005WL

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    5. Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with clip from the No. 1 transmission control cable bracket.

    6. Remove the clip from the transmission control cable assembly.

    7. A0005CVE03

      Disconnect the transmission control cable assembly from the No. 2 transmission control cable bracket and No. 3 transmission control cable bracket.

      Table 1. Text in Illustration
      *1 No. 2 Transmission Control Cable Bracket
      *2 No. 3 Transmission Control Cable Bracket
    8. A0005CT

      Turn back the dash panel insulator.

    9. Remove the 2 bolts and pull out the transmission control cable assembly from the body.