LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE LANE DEPARTURE ALERT SYSTEM (w/ Steering Control)

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   Tech Tips

   The following items can be customized.

   
   

   1. Customizing with the Multi-information display

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup

      3. Select the setting by referring to the table below.

         Lane Departure Alert

         Display	Default	Content	Setting	Relevant ECU
         Steering Assist	On	Assists steering to prevent lane departure (steering wheel control)	On/Off	Forward recognition camera
         Sensitivity	Standard	Timing of lane departure warning	Standard/High	Forward recognition camera
         Alert	Buzzer	Method of lane departure warning	Buzzer/Steering vibrator	Forward recognition camera
         Sway Warning	On	Vehicle sway warning function	On/Off	Forward recognition camera
         Sway Sensitivity	Standard	Unsteady driving detection sensitivity	Low/Standard/High	Forward recognition camera