POWER SWITCH INSTALLATION

PROCEDURE

1. INSTALL POWER SWITCH

   
   

   1. Engage the 2 claws to install the power switch.

2. INSTALL SWITCH BASE

   Click here

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

5. INSTALL INSTRUMENT SIDE PANEL LH

   Click here

6. INSTALL FRONT DOOR OPENING TRIM COVER LH

   Click here

7. INSTALL COWL SIDE TRIM BOARD LH

   Click here

8. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

9. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

   Click here.

10. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

    Click here.

11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

12. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here