THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

   
   

   1. Install a new gasket on the water inlet with thermostat sub-assembly.

   2. Install the water inlet with thermostat sub-assembly with the 2 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. CONNECT NO. 6 WATER BY-PASS HOSE

   
   

   1. Connect the No. 6 water by-pass hose.

3. CONNECT NO. 2 RADIATOR HOSE

   Click here

4. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

   Click here

5. ADD COOLANT (for Engine)

   Click here

6. INSPECT FOR COOLANT LEAK (for Engine)

   Click here