FUEL SENDER GAUGE ASSEMBLY INSTALLATION

PROCEDURE

1. Click here

   INSTALL FUEL SENDER GAUGE ASSEMBLY

   
   
   1. 

      Install the fuel sender gauge assembly by sliding it downward.

   2. Connect the connector of the fuel sender gauge assembly.

   3. Install the 2 wire harness protectors.

      Note:

      Do not damage the wire harness.

   4. Connect the 2 wire harness clamps.

      Note:

      Do not damage the wire harness.

2. Click here

   INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

   (Click here)