EXHAUST MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE FRONT LOWER BUMPER ABSORBER (w/ Front Lower Bumper Absorber)

    Click here

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH (w/o Front Lower Bumper Absorber)

    Click here

  4. REMOVE ENGINE UNDER COVER RH (w/ Front Lower Bumper Absorber)

    Click here

  5. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  6. REMOVE ENGINE UNDER COVER LH (w/o Front Lower Bumper Absorber)

    Click here

  7. REMOVE ENGINE UNDER COVER LH (w/ Front Lower Bumper Absorber)

    Click here

  8. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A00085T

      Disconnect the heated oxygen sensor connector.

    2. A0006CZ

      Remove the 2 bolts, 2 compression springs and 2 nuts.

    3. Remove the front exhaust pipe assembly from the exhaust pipe support.

    4. Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.

  9. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A0009K0

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator.

  10. REMOVE AIR FUEL RATIO SENSOR

    Click here

  11. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A0005XO

      Remove the 3 bolts and No. 1 manifold converter insulator.

  12. REMOVE NO. 2 MANIFOLD STAY


    1. A00079S

      Remove the bolt, nut and No. 2 manifold stay.

  13. REMOVE MANIFOLD STAY


    1. A0007IY

      Remove the bolt, nut and manifold stay.

  14. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A0006RR

      Remove the 5 nuts and exhaust manifold converter sub-assembly.

    2. A00075Q

      Remove the gasket from the cylinder head sub-assembly.

  15. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A0003ML

      Remove the 2 bolts and No. 2 exhaust manifold heat insulator.