BATTERY COOLING FILTER INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 HYBRID BATTERY INTAKE FILTER


    1. A00058Q

      Install the No. 1 hybrid battery intake filter to the No. 1 hybrid battery intake duct.

      Note

      Make sure the rubber portion of the No. 1 hybrid battery intake filter is fit behind the entire lip (A) as shown in the illustration.

      A0003H8E02
      Text in Illustration
      *a Cross Section View of No. 1 Hybrid Battery Intake Duct
      *b Rubber Portion of No. 1 Hybrid Battery Intake Filter
    2. A0004DIE01
      Text in Illustration
      *a Tape

      Apply tape as shown in the illustration to secure the No. 1 hybrid battery intake filter to the No. 1 hybrid battery intake duct.

      Tech Tips

      If the adhesion of the tape is weak, replace it with new tape.

  2. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  3. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  4. INSTALL REAR SEAT ASSEMBLY

    Click here

  5. CLEAR DTC

    Tech Tips

    If the message "Maintenance Required for Hybrid Battery Cooling Parts at Your Dealer" is displayed on the multi-information display, clean or replace the No. 1 hybrid battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output Click here.