BATTERY COOLING FILTER INSPECTION

PROCEDURE

1. INSPECT NO. 1 HYBRID BATTERY INTAKE FILTER

   
   

   1. Inspect No. 1 hybrid battery intake filter.

      Standard
      No clogs or damage.

      Note

      
      

      • If the No. 1 hybrid battery intake filter is damaged, replace it with a new one.

      • If the No. 1 hybrid battery intake filter is damaged, check for foreign matter in the battery cooling blower assembly. Clean or replace the battery cooling blower assembly if necessary.

      • Make sure to hold the fan of the battery cooling blower assembly when cleaning the battery cooling blower assembly with compressed air. If the fan is allowed to rotate, voltage will be generated, which may damage the battery cooling blower assembly circuit.

   2. Clean the No. 1 hybrid battery intake filter.

      Note

      
      

      • Clean the No. 1 hybrid battery intake filter with an air blow gun. Do not use water or any other liquid.

      • Do not use a wire brush or any other type of brush as it may damage the No. 1 hybrid battery intake filter.

      • To prevent removed foreign matter from entering the HV battery, make sure to remove the No. 1 hybrid battery intake filter when cleaning it.

      
      

      1. Using an air blow gun, clean the No. 1 hybrid battery intake filter.