ACCELERATOR PEDAL SENSOR INSTALLATION

PROCEDURE

1. Click here

   INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

   Note:
   

   • Avoid physical shock to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   • This accelerator pedal does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

   
   
   1. 

      Temporarily install the accelerator pedal sensor assembly with the 2 bolts.

   2. Tighten the 2 bolts in the order shown in the illustration.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

   3. Connect the connector to the accelerator pedal sensor assembly.