BATTERY BLOWER INSTALLATION

PROCEDURE

1. Click here

   INSTALL BATTERY COOLING BLOWER ASSEMBLY

   Note:
   

   • Be sure not to touch the fan part of the battery cooling blower assembly.

   • Do not lift the battery cooling blower assembly using the wire harness.

   
   

   1. Install the battery cooling blower assembly to the HV battery with the 3 nuts.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

   2. Connect the connector to the battery cooling blower assembly.

2. Click here

   INSTALL NO. 2 HYBRID BATTERY INTAKE DUCT

   
   

   1. Engage the 2 claws to install the No. 2 hybrid battery intake duct to the battery cooling blower assembly.

   2. Install the clip.

      Note:

      Ensure that the No. 2 hybrid battery intake duct is installed securely.

3. Click here

   INSTALL NO. 2 HYBRID VEHICLE BATTERY UPPER COVER BRACKET

   
   

   1. Install the No. 2 hybrid vehicle battery upper cover bracket with the 2 nuts.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

4. Click here

   INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

   
   

   1. Install the No. 1 hybrid battery intake duct with the 3 clips.

      Note:

      Ensure that the No. 1 hybrid battery intake duct is installed securely.

5. Click here

   INSTALL ROOM PARTITION PANEL INSULATOR

   Click here

6. Click here

   INSTALL REAR SEAT SIDE GARNISH LH

   Click here

7. Click here

   INSTALL REAR DOOR SCUFF PLATE LH

   Click here

8. Click here

   INSTALL REAR SEAT ASSEMBLY

   (Click here)

9. Click here

   INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER

   Click here

10. Click here

    INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here