SUB RADIATOR INSTALLATION

PROCEDURE

1. Click here

   INSTALL RADIATOR ASSEMBLY

   
   
   1. 

      Install the radiator assembly with the 4 bolts.

      Bolt A
      5.0 N*m	51 kgf*cm	44 in.*lbf
      Bolt B
      9.0 N*m	92 kgf*cm	80 in.*lbf

   2. 

      Connect the 2 water hoses to the radiator assembly.

      Table 1. Text in Illustration

      *a	Alignment Mark
      *b	Rib
      *c	120°
      *d	135°
      *e	1 to 5 mm (0.0394 to 0.197 in.)

      Note:
      

      • Make sure that the clip is positioned as shown in the illustration.

      • Make sure to align the alignment marks of the hoses with the ribs of the radiator assembly.

      • Do not remove the pieces of cloth or plastic bags from the pipes and disconnected hoses until installation.

2. Click here

   INSTALL RADIATOR SIDE DEFLECTOR RH

   
   

   1. Engage the 3 claws to install the radiator side deflector RH.

3. Click here

   INSTALL UPPER RADIATOR SUPPORT

   Click here

4. Click here

   INSTALL HOOD LOCK ASSEMBLY

   Click here

5. Click here

   INSTALL RADIATOR RESERVE TANK ASSEMBLY

   Click here

6. Click here

   INSTALL NO. 5 INVERTER BRACKET

   Click here

7. Click here

   INSTALL INLET AIR CLEANER ASSEMBLY

   Click here

8. Click here

   INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

   Click here

9. Click here

   INSTALL FRONT BUMPER ENERGY ABSORBER

   Click here

10. Click here

    INSTALL FRONT BUMPER ASSEMBLY

    (Click here)

11. Click here

    ADD COOLANT (for Inverter)

    Click here

12. Click here

    INSPECT FOR COOLANT LEAK (for Inverter)

    Click here