SERVICE PLUG GRIP INSTALLATION

PROCEDURE


  1. INSTALL SERVICE PLUG GRIP

    CAUTION:

    Wear insulated gloves.

    Note

    Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.


    1. Wear insulated gloves and install the service plug grip in the order shown in the illustration.

      A0009P6

    2. Rotate the lever of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.

  2. INSTALL NO. 8 HYBRID VEHICLE BATTERY SHIELD PANEL


    1. Install the No. 8 hybrid vehicle battery shield panel to the HV battery with the 2 nuts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  3. INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER

    Click here

  4. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here