SERVICE PLUG GRIP REMOVAL

Info Added 2017-08-02

PROCEDURE


  1. PRECAUTION

    CAUTION:

    The hybrid system has high-voltage circuits. Accidents, such as electric shock, or electric leaks may result if the hybrid system is not operated in a correct manner. Make sure to follow the correct procedure Click here.

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  5. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER

    Click here

  6. REMOVE NO. 8 HYBRID VEHICLE BATTERY SHIELD PANEL


    1. A000434

      Remove the 2 nuts and No. 8 hybrid vehicle battery shield panel from the HV battery.

  7. REMOVE SERVICE PLUG GRIP

    CAUTION:


    • Wear insulated gloves.

    • Remove the service plug grip to interrupt the high voltage circuit at the time of inspection or repair.


    1. Wear insulated gloves and remove the service plug grip after sliding up the lever of the service plug grip as shown in the illustration.

      A00055V

      CAUTION:


      • Keep the removed service plug grip in your pocket to prevent other technicians from accidentally reconnecting it while you are servicing the vehicle.

      • After removing the service plug grip, do not touch the high voltage connectors or terminals for 10 minutes.

      Tech Tips

      Waiting for at least 10 minutes is required to discharge the high voltage capacitor inside the inverter with converter assembly.