BATTERY BLOWER REMOVAL

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  2. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER

    Click here

  3. REMOVE REAR SEAT ASSEMBLY

    Click here

  4. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  5. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

  6. REMOVE ROOM PARTITION PANEL INSULATOR

    Click here

  7. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT


    1. A0008WF

      Remove the 3 clips and No. 1 hybrid battery intake duct.

  8. REMOVE NO. 2 HYBRID VEHICLE BATTERY UPPER COVER BRACKET


    1. A0008XD

      Remove the 2 nuts and No. 2 hybrid vehicle battery upper cover bracket.

  9. SEPARATE NO. 2 HYBRID BATTERY INTAKE DUCT


    1. A0007LN

      Remove the clip.

    2. Disengage the 2 claws and separate the No. 2 hybrid battery intake duct from the battery cooling blower assembly.

  10. REMOVE BATTERY COOLING BLOWER ASSEMBLY

    Note


    • Be sure not to touch the fan part of the battery cooling blower assembly.

    • Do not lift the battery cooling blower assembly using the wire harness.


    1. A0006C0

      Disconnect the connector from the battery cooling blower assembly.

    2. Remove the 3 nuts and battery cooling blower assembly from the HV battery.