STEERING KNUCKLE REMOVAL

CAUTION / NOTICE / HINT

Note

When the brake pedal is first depressed after replacing the brake pads or pushing back the disc brake piston, DTC C1214 may be output. As there is no malfunction, clear the DTC.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT AXLE ASSEMBLY

    Click here

  2. REMOVE FRONT LOWER BALL JOINT ASSEMBLY

    Click here

  3. REMOVE FRONT NO. 1 WHEEL BEARING DUST DEFLECTOR

    Click here

  4. REMOVE FRONT AXLE HUB HOLE SNAP RING

    Click here

  5. REMOVE FRONT AXLE HUB SUB-ASSEMBLY

    Click here

  6. REMOVE FRONT DISC BRAKE DUST COVER

    Click here

  7. REMOVE STEERING KNUCKLE


    1. A00058ZE04
      Text in Illustration
      *1 Steel Plate
      *2 V-block

      Place the bearing inner race (outside) on the front axle hub bearing.

    2. Using SST, a steel plate, V-blocks and a press, remove the front axle hub bearing from the steering knuckle.

      SST
      09950-60010   ( 09951-00440, 09952-06010 )
      09950-60020   ( 09951-00750 )
      09950-70010   ( 09951-07100 )

      Note

      Keep the steering knuckle level.