REAR WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WIPER MOTOR ASSEMBLY


    1. A002YVGC03
      *a Alignment Mark

      Operate the rear wiper motor assembly.

    2. Stop the rear wiper motor assembly operation.

    3. Check the automatic stop position.

      Tech Tips

      After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

      Standard Clearance
      Area Measurement
      A 10.0 mm (0.394 in.)
      OK
      The rear wiper stops at the position shown in the illustration.