OUTER REAR VIEW MIRROR GLASS INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL OUTER MIRROR (for LED Type Turn Signal Light)


    1. A001XUY

      Connect the 2 connectors and engage the guide.

    2. A001XPD

      Connect the connector.

    3. Engage the guide.

    4. A001VRFC01
      B00497S Install in this Direction

      Engage the claws to install the outer mirror as shown in the illustration.

      Note

      Do not push the outer mirror with excessive force. Doing so may break the mirror surface.

  2. INSTALL OUTER MIRROR (for Bulb Type Turn Signal Light)


    1. Connect the 2 connectors.

    2. w/ Blind Spot Monitor:


      1. Connect the connector.

    3. A001UKIC01
      B00497S Install in this Direction

      Engage the claws to install the outer mirror as shown in the illustration.

      Note

      Do not push the outer mirror with excessive force. Doing so may break the mirror surface.