BACK DOOR REASSEMBLY

Info Added 2017-10-06

PROCEDURE


  1. INSTALL NO. 1 BACK DOOR EMBLEM

    Click here

  2. INSTALL NO. 4 BACK DOOR NAME PLATE (for AWD)

    Click here

  3. INSTALL NO. 2 BACK DOOR NAME PLATE

    Click here

  4. INSTALL NO. 1 BACK DOOR NAME PLATE (w/ Brand Mark)

    Click here

  5. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  6. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. INSTALL NO. 2 BACK DOOR PANEL PROTECTOR


    1. Clean vehicle installation surface.

    2. Remove the release paper from a new No. 2 back door panel protector.

    3. A005ONEC02
      B004987 Double-sided Tape

      Engage the clips to install the No. 2 back door panel protector.

    4. Press the double-sided tape area of the No. 2 back door panel protector.

  8. INSTALL NO. 1 BACK DOOR PANEL PROTECTOR

    Tech Tips

    Use the same procedure for the No. 2 back door panel protector.

  9. INSTALL BACK DOOR PANEL CUSHION


    1. A005OBY

      Engage the claws to install the 2 back door panel cushions.

  10. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

    Click here

  11. INSTALL NO. 2 BACK DOOR GARNISH RETAINER (w/o Rear View Monitor System)


    1. A005P22

      Engage the claws to install the No. 2 back door garnish retainer.

  12. INSTALL LICENSE PLATE LIGHT ASSEMBLY

    Click here

  13. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  14. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  15. INSTALL REAR WASHER NOZZLE (w/ Rear Wiper)

    Click here

  16. INSTALL REAR SPOILER ASSEMBLY

    Click here

  17. INSTALL BACK DOOR LOWER STOPPER


    1. A005PFN

      Engage the guide and install the back door lower stopper.

    2. Install a new bolt.

      Torque:
      7.2 N*m  { 73 kgf*cm, 64 in.*lbf }

      Tech Tips

      Use the same procedure for the RH side and LH side.

  18. INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)

    Click here

  19. INSTALL REAR WIPER MOTOR GROMMET (w/ Rear Wiper)

    Click here

  20. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)

    Click here

  21. INSTALL BACK DOOR LOCK ASSEMBLY

    Click here

  22. INSTALL BACK DOOR LOCK COVER


    1. Clean vehicle installation surface.

    2. Remove the release paper from a new back door lock cover.

    3. A005QFBC02
      B004987 Double-sided Tape

      Engage the claws to install the back door lock cover.

    4. Press the double-sided tape area of the back door lock cover.

  23. INSTALL BACK DOOR SERVICE HOLE COVER LH


    1. A005PCQ

      Engage the claws to install the back door service hole cover LH.

  24. INSTALL BACK DOOR SERVICE HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  25. INSTALL NO. 3 BACK DOOR SERVICE HOLE COVER


    1. A005QBN

      Engage the claws to install the No. 3 back door service hole cover.

  26. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER

    Tech Tips

    Use the same procedure as for the No. 1 back door service hole cover.

  27. INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER


    1. A005OBI

      Engage the claws to install the No. 1 back door service hole cover.

  28. INSTALL DOOR PULL HANDLE


    1. A005Q83

      Engage the claws to install the door pull handle as shown in the illustration.

      Tech Tips

      Full open the back door, and ensure that the arrow provided on the back of the door pull handle is facing upward.

  29. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    1. A005QCA

      Engage the clips to install the back door trim panel assembly.

  30. INSTALL PACKAGE TRAY TRIM GARNISH HOOK

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. A005PWM

      Install the package tray trim garnish hook.

    2. A005PVT

      Install the screw.

  31. INSTALL BACK DOOR SIDE GARNISH LH


    1. A005Q24

      Engage the claws and clips to install the back door side garnish LH.

  32. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  33. INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY


    1. A005PVV

      Engage the claws and clips to install the back door trim upper panel assembly.

  34. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  35. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here