OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY


    1. A005PDN

      Engage the guides and claw to install the outer rear view mirror assembly.

    2. Install the 3 bolts.

      Torque:
      for TMMT Made
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      for TMC Made
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the connector.

  2. INSTALL FRONT DOOR VENT SEAL

    Click here

  3. INSTALL FRONT DOOR BELT SEAL

    Click here

  4. INSTALL FRONT DOOR GLASS INNER WEATHERSTRIP

    Click here

  5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

    Click here

  6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  7. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL (for Driver Side)

    Click here

  8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL (for Front Passenger Side)

    Click here

  9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  10. INSPECT POWER MIRROR CONTROL SYSTEM

    Click here