AIR CONDITIONING UNIT(for DENSO Made) COMPONENTS
Info Added 2017-10-06 
ILLUSTRATION
| *1 | COWL BODY MOUNTING REINFORCEMENT LH | *2 | COWL BODY MOUNTING REINFORCEMENT RH |
| *3 | NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL | *4 | OUTER COWL TOP PANEL SUB-ASSEMBLY |
| *5 | WATER GUARD PLATE LH | - | - |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) |  |
N*m (kgf*cm, ft.*lbf): Specified torque |
ILLUSTRATION
| *1 | COOLER REFRIGERANT LIQUID PIPE A | *2 | INLET HEATER WATER HOSE |
| *3 | OUTLET HEATER WATER HOSE | *4 | SUCTION PIPE SUB-ASSEMBLY |
| *5 | O-RING | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Compressor oil ND-OIL 8 or equivalent | - | - |
ILLUSTRATION
| *A | w/ Clearance Sonar System | - | - |
| *1 | CLEARANCE WARNING ECU ASSEMBLY | *2 | COOLER THERMISTOR (ROOM TEMPERATURE SENSOR) |
| *3 | WINDSHIELD WIPER RELAY ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | NO. 3 DASH PANEL INSULATOR PAD | *2 | FRONT FLOOR CARPET ASSEMBLY |
ILLUSTRATION
| *A | When using Part No. 90119-06995 | *B | When using Part No. 90119-W0017 |
| *1 | DRAIN COOLER HOSE | *2 | INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONER UNIT ASSEMBLY |
| *3 | INSTRUMENT PANEL WIRE | *4 | NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY |
| *5 | NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY | *6 | NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
ILLUSTRATION
| *1 | AIR CONDITIONER UNIT ASSEMBLY | *2 | LOWER DEFROSTER NOZZLE ASSEMBLY |
| *3 | INSTRUMENT PANEL REINFORCEMENT ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | AIR CONDITIONING AMPLIFIER ASSEMBLY | *2 | AIR CONDITIONING DUCT SUB-ASSEMBLY |
| *3 | AIR CONDITIONING HARNESS ASSEMBLY | *4 | COVER |
| *5 | HEATER RADIATOR UNIT SUB-ASSEMBLY | *6 | NO. 1 AIR DUCT |
| *7 | AIR CONDITIONING RADIATOR ASSEMBLY | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | COOLER EXPANSION VALVE | *2 | HEATER CLAMP |
| *3 | HEATER COVER | *4 | HEATER PIPE GROMMET |
| *5 | HEATER RADIATOR UNIT SUB-ASSEMBLY | *6 | NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *7 | NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY | *8 | NO. 1 COOLER THERMISTOR |
| *9 | GROMMET | *10 | O-RING |
| *11 | UPPER HEATER CASE | *12 | LOWER HEATER CASE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Compressor oil ND-OIL 8 or equivalent | - | - |