REAR SEAT INNER BELT ASSEMBLY(for RH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY (w/ Seat Belt Warning System)


    1. Check the resistance.


      1. A001Y0KC48
        *a

        Component without harness connected

        (Rear Seat Inner Belt Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        M31-5 (RBR+) - M31-4 (RBR-) Rear seat inner belt assembly unfastened Below 1 Ω
        Rear seat inner belt assembly fastened 10 kΩ or higher

        If the result is not as specified, replace the rear seat inner belt assembly.