FRONT SEAT OUTER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY

    A001T86C01
    *a Retractor
    *b Unlock
    *c Lock
    *d 45°

    1. Before installing the front seat outer belt assembly, check the ELR.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

        If the result is not as specified, replace the front seat outer belt assembly.