REAR SEAT INNER BELT ASSEMBLY(for RH Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The following procedure is for LHD vehicles.

PROCEDURE


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY


    1. w/o Seat Belt Warning System:


      1. A001SGMC01
        *a Protruding Part

        Tighten the bolt and install the rear seat inner belt assembly.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the vehicle body.

    2. w/ Seat Belt Warning System:


      1. A001U06C01
        *a Protruding Part

        Tighten the bolt and install the rear seat inner belt assembly.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the vehicle body.

      2. Connect the connector.

  2. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  3. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

  4. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here