PRE-COLLISION SYSTEM WARNING BUZZER(for RHD) INSPECTION

PROCEDURE


  1. INSPECT PRE-COLLISION CITY BUZZER


    1. Make sure that there is no looseness in the locking part and connecting part of the connector.

    2. Disconnect the pre-collision city buzzer connector.

    3. Check the connector and terminals for deformation and corrosion.

      OK
      No deformation or corrosion.
    4. A001T3R

      Connect a positive (+) lead from the battery to terminal 1, and a negative (-) lead to terminal 2 of the pre-collision city buzzer, and check that the buzzer sounds.

      OK
      The pre-collision city buzzer sounds.

      If the result is not as specified, replace the pre-collision city buzzer.