PRE-COLLISION SYSTEM WARNING BUZZER(for RHD) REMOVAL

PROCEDURE


  1. REMOVE INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

    Click here

  2. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

    Click here

  3. REMOVE STEREO OPENING COVER WITH BRACKET (w/ Cover)

    Click here

  4. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

    Click here

  5. REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY

    Click here

  6. REMOVE PRE-COLLISION CITY BUZZER


    1. A005PYI

      Disengage the clamp.

    2. Disconnect the connector to remove the pre-collision city buzzer.

      Note

      If the pre-collision city buzzer has been struck or dropped, replace it with a new one.