REAR SEAT ASSEMBLY INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL REAR SEAT CUSHION LOCK HOOK


    1. A005PMUC01
      B00497S Install in this Direction

      Engage the claws to install a new rear seat cushion lock hook as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY


    1. Place the bench type rear seat cushion assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A005P5ZC01
      *a Rear Seat Cushion Frame Hook Front Side
      *b Rear Seat Cushion Frame Hook Rear Side
      B00497S Install in this Direction (1)
      B0049AC Install in this Direction (2)

      Engage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.

    3. Engage the rear seat cushion frame hooks on the front side of the bench type rear seat cushion assembly as shown in the illustration.

      Note

      Confirm that the bench type rear seat cushion assembly is securely installed.

  3. INSTALL REAR SEATBACK ASSEMBLY LH


    1. Place the rear seatback assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A005OYEE01

      Engage the guides to install the rear seatback assembly LH.

    3. Install the 2 bolts.

      Torque:
      36.8 N*m  { 375 kgf*cm, 27 ft.*lbf }

      Note

      Tighten bolts in the order shown in the illustration.

    4. A005P8DC02
      *a Hook and Loop Fastener

      Engage the hook and loop fasteners.

    5. Pull back the rear seatback assembly LH.

  4. INSTALL REAR SEATBACK ASSEMBLY RH


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A005PN0E01

      Engage the guides to install the rear seatback assembly RH.

    3. Install the 2 bolts.

      Torque:
      36.8 N*m  { 375 kgf*cm, 27 ft.*lbf }

      Note

      Tighten bolts in the order shown in the illustration.

    4. A005PU8C02
      *a Hook and Loop Fastener

      Engage the hook and loop fasteners.

    5. Pull back the rear seatback assembly RH.

  5. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A005PHF

      Connect the rear center seat outer belt assembly as shown in the illustration.

  6. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)


    1. Install the rear seat center headrest assembly.

  7. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)


    1. Install the rear seat headrest assembly.

  8. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)


    1. Install the rear seat headrest assembly.