FRONT SEAT ASSEMBLY DISASSEMBLY

Info Added 2017-10-06

CAUTION / NOTICE / HINT

CAUTION:


  • B00495G

    Be sure to read Precaution thoroughly before servicing.

    Click here

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the driver side and front passenger side.

  • The procedure listed below is for the driver side.

PROCEDURE


  1. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (w/ Seat Position Airbag Sensor)

    Click here

  2. REMOVE SEAT POSITION AIRBAG SENSOR (w/ Seat Position Airbag Sensor)


    1. for 6 Way Seat Type:

      Click here

    2. for 4 Way Seat Type:

      Click here

  3. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    Click here

  4. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    Click here

  5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    Click here

  6. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A005OQM

      Disconnect the rubber band of the separate type front seatback cover.

  7. REMOVE VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)


    1. A005Q6AC01
      *a Protective Tape
      B00497S Remove in this Direction

      Operate the vertical adjusting handle and using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the vertical adjusting handle as shown in the illustration.

  8. REMOVE RECLINING HINGE OUTER COVER


    1. A005OF5C01
      *a Protective Tape
      B00497S Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide to remove the reclining hingeouter cover as shown in the illustration.

  9. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. A005OF7

      Disengage the guide to remove the reclining adjuster release handle.

  10. REMOVE SEAT ADJUSTER COVER CAP (w/ Vertical Adjuster)


    1. A005PBIC01
      *a Protective Tape
      B00497S Remove in this Direction (1)
      B0049AC Remove in this Direction (2)

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws as shown in the illustration.

    2. Disengage the guides to remove the seat adjuster cover cap as shown in the illustration.

  11. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. A005OUGC01
      B00497S Remove in this Direction

      Disengage the claws as shown in the illustration.

    2. A005PJCC01
      B00497S Remove in this Direction (1)
      B0049AC Remove in this Direction (2)

      Disengage the claws and guides (A) as shown in the illustration.

    3. Disengage the guide (B) to remove the front seat cushion shield as shown in the illustration.

    4. A005P4S

      w/ Lumbar Support:


      1. Disengage the clamps.

      2. Disconnect the connector.

  12. REMOVE FRONT LUMBAR POWER SEAT SWITCH (w/ Lumbar Support)

    Click here

  13. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. A005PMIC01
      B00497S Remove in this Direction

      Disengage the claws as shown in the illustration.

    2. A005PQBC01
      B00497S Remove in this Direction

      Disengage the claws and guides to remove the front seat inner cushion shield as shown in the illustration.

  14. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. A005Q38C01
      B00497S Remove in this Direction

      Disengage the claws as shown in the illustration.

    2. A005PEXC01
      B00497S Remove in this Direction (1)
      B0049AC Remove in this Direction (2)

      Disengage the claws and guides (A) as shown in the illustration.

    3. Disengage the guide (B) to remove the front seat cushion shield as shown in the illustration.

  15. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. A005Q4RC01
      B00497S Remove in this Direction

      Disengage the claws as shown in the illustration.

    2. A005PGDC01
      B00497S Remove in this Direction

      Disengage the claws and guides to remove the front seat inner cushion shield as shown in the illustration.

  16. REMOVE VERTICAL ADJUSTER BRACKET COVER (w/ Vertical Adjuster)


    1. A005PF4

      Disengage the claw to remove the vertical adjuster bracket cover.

  17. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. A005PQX

      Disengage the hooks.

    2. w/ Lumbar Support:


      1. A005PJM

        Disconnect the connector.

      2. Disengage the clamp.

    3. w/ Seat Heater System:


      1. A005OSF

        Disconnect the connector.

      2. Disengage the clamp.

    4. A005PSQ

      w/ Front Seat Side Airbag:


      1. Disengage the claw and clamps to separate the front seat airbag assembly wire harness.

        Tech Tips

        Disengage the clamps first.

    5. A005OV4

      Remove the 4 bolts.

    6. Disengage the guides to remove the separate type front seatback assembly from the separate type front seat cushion assembly.

  18. REMOVE FRONT SEAT HEADREST SUPPORT


    1. A005POD

      Disengage the hooks.

    2. w/ Seat Heater System:


      1. A005QDW

        Disengage the clamp.

    3. A005QAL

      Open the 2 fasteners as shown in the illustration.

    4. A005PNJC01
      B00497S Remove in this Direction

      Disengage the claws to remove the 2 front seat headrest supports as shown in the illustration.

  19. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Remove the separate type front seatback cover with pad from the separate type front seatback spring assembly.

  20. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. w/ Front Seat Airbag Assembly:


      1. Using a screwdriver, disengage the claws to remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.

        A005OJAC01
        *a Screwdriver - -

    2. w/o Front Seat Airbag Assembly:


      1. Using a screwdriver, disengage the claws to remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.

        A005P4JC01
        *a Screwdriver - -

  21. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  22. REMOVE FRONT SEAT AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

    Click here

  23. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (w/ Lumbar Support)

    Click here

  24. REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (w/o Lumbar Support)


    1. A005OBU

      Disengage the claws to separate the 2 front seatback edge protectors from the front seatback frame sub-assembly.

    2. A005PL2C01
      B00497S Remove in this Direction

      Disengage the guides to remove the front seatback spring sub-assembly from the front seatback frame sub-assembly as shown in the illustration.

    3. A005Q1N

      Remove the 2 front seatback edge protectors from the front seatback spring sub-assembly.

  25. REMOVE FRONT SEATBACK HOOK


    1. A005OHE

      Disengage the claws to remove the 2 front seatback hooks from the front seatback frame sub-assembly.

  26. REMOVE NO. 2 FRONT SEAT WIRE (w/ Lumbar Support)


    1. A005Q8L

      Disengage the clamp to remove the No. 2 front seat wire.

  27. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. w/ Seat Heater System:


      1. A005P1H

        Disengage the clamp.

      2. Disconnect the connector.

    2. for Front Passenger Side:


      1. A005OZD

        Disengage the claw to remove the occupant detection sensor connector.

    3. A005OL5

      Disengage the hooks.

    4. Disengage the hooks (A) and hooks (B) to remove the separate type front seat cushion cover with pad.

      A005PCBE01

  28. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. Using a screwdriver, disengage the claws to remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.

      A005ONFC01
      *a Screwdriver - -

  29. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  30. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)


    1. A005P84C02
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield LH.

  31. REMOVE FRONT SEAT LOWER CUSHION SHIELD (w/ Vertical Adjuster)


    1. A005OJMC01
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield.

  32. REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER LH (for Driver Side)


    1. A005PB8

      w/ Lumbar Support:


      1. Disengage the claw.

    2. A005PN3

      Disengage the claws to remove the LH seat reclining adjuster inside cover LH.

  33. REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER RH (for Driver Side)


    1. A005PTI

      Disengage the claws to remove the LH seat reclining adjuster inside cover RH.

  34. REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER LH (for Front Passenger Side)


    1. A005PUJ

      Disengage the claws to remove the RH seat reclining adjuster inside cover LH.

  35. REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER RH (for Front Passenger Side)


    1. A005PYN

      Disengage the claws to remove the RH seat reclining adjuster inside cover RH.

  36. REMOVE NO. 2 FRONT SEAT WIRE (w/ Seat Position Airbag Sensor)


    1. A005OKZ

      Disengage the clamp and claw to remove the No. 2 front seat wire.

  37. REMOVE FRONT SEAT WIRE (for Driver Side)


    1. A005ORQ

      Disengage the clamps.

    2. Disengage the claw to remove the front seat wire.

  38. REMOVE FRONT SEAT WIRE (for Front Passenger Side)


    1. A005Q5V

      Disengage the clamps.

    2. Disengage the claw to remove the front seat wire.

  39. REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER


    1. A005PRM

      Remove the 2 screws.

    2. Disengage the claw to remove the front seat cushion wire harness holder.

  40. REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY


    1. A005P6P

      Disengage the hooks to remove the front seat cushion spring sub-assembly from the front seat adjuster assembly.

  41. REMOVE SEAT TRACK ADJUSTING HANDLE


    1. A005PCD

      Disengage the claws to remove the seat track adjusting handle from the front seat adjuster assembly.

  42. REMOVE CONNECTOR HOLDER (for Front Passenger Side)


    1. A005OI3

      Disengage the claw to remove the connector holder.

  43. REMOVE CONNECTOR MALE HOUSING (w/o Seat Heater System)

    A005P7I

    1. Disengage the claw to remove the connector male housing.