AIRBAG SYSTEM CHECK MODE PROCEDURE


  1. CHECK MODE (SIGNAL CHECK): DTC CHECK


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch ON.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / SRS Airbag / Utility / Signal Check.


      Body Electrical > SRS Airbag > Utility
      Tester Display
      Signal Check

      Note

      Select Signal Check on the GTS to clear the DTCs (both current and history).

      Tech Tips


      • DTCs can be detected more sensitively in check mode than in normal diagnosis mode.

      • Perform check mode inspection when a malfunction in a squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.