COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY


    1. Connect the 2 connectors to install the combination meter assembly.

    2. A001W4P

      Engage the guides and clips.

    3. Install the 2 screws.

  2. INSTALL STARTER SWITCH BEZEL (for RHD with Entry and Start System)

    Click here

  3. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)


    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here