METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Flasher Sound Tone Setting Function to change the flasher sound tone Tone 1 00:Tone 1,01:Tone 2,10:Tone 3 Combination meter assembly

        Display
        Tester Display Description Default Setting ECU
        ECO Drive Indicator Zone Function to change the ECO Drive Indicator Zone ON 0:OFF,1:ON Combination meter assembly
        ECO Drive Indicator Light Function to change the ECO Drive Indicator light*1 ON 0:OFF,1:ON Combination meter assembly
        ODO Display Time After IG OFF Setting Function to change the ODO display time after the ignition switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly

        Warning
        Tester Display Description Default Setting ECU
        Flasher Sound Tone Setting Function to change the flasher sound tone Tone 1 00:Tone 1,01:Tone 2,10:Tone 3 Combination meter assembly
        Lane Change Flashing Times Setting Function to change the lane change flashing time 3 000:OFF,001:3,010:4,011:5,100:6,101:7 Combination meter assembly

        • *1: for Color TFT Type