BACK DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR LOCK ASSEMBLY


    1. A001SHIC03
      *a

      Component without harness connected

      (Back Door Lock Assembly)
      *b Lock
      *c Unlock

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 (ACT-) - 3 (D+) Unlocked Below 1 Ω
        2 (ACT-) - 3 (D+) Locked 10 kΩ or higher

        If the result is not as specified, replace the back door lock assembly.